Facebook Instagram
Hire terms

Turbosound
Milan M12

1100 Watt 2 Way 12″ Full Range Powered Loudspeaker

Turbosound

M12_P0AUU_Front_XL.png
M12_P0AUU_Other2_XL.png
M12_P0AUU_Rear_XL.png

MILAN M12

1100 Watt 2 Way 12″ Full Range Powered Loudspeaker with Klark Teknik DSP Technology for Portable PA and Installation Applications

 

The 1,100-Watt full range MILAN M12 is a portable 12″ two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.

 

Designed for both portable and permanent install applications, the M12’s discrete inputs are each equipped with balanced, combination ¼ ” jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.

Specifications

Components  

  • 1 x 12″ LF driver
  • 1 x 1″ HF driver

 

Connectors    

  • Mic/Line input: combo jack/female XLR wired pin 2 hot
  • Mix out: male XLR wired pin 2 hot
  • IEC mains connector with integrated fuseholder

 

Controls

  • Level
  • Line/Mic
  • Low Cut
  • Speech/Music
  • Bass and Treble
  • Front LED
  • Mains on/off

 

System Data

 

Frequency Range      

  • 50 Hz–18 kHz ±3 dB
  • 45 Hz–20 kHz -10 dB

Dispersion @-6 dB pts          

  • 90° H x 60° V

Max SPL (peak)          

  • 128 dB

Equalisation   

  • Bass: ±6 dB @ 80 Hz
  • Treble: ±6 dB @ 12 kHz

Boost Frequency       

  • N/A

 

Indicators

  • Power LED: Blue
  • Signal LED: Green
  • Limit LED: Red
  • Clip LED: Red

 

Circuit Protection

 

Amplifier Protection 

  • Full short circuit, open circuit, thermal

 

LF/HF Driver

 

Max Output Power   

  • LF: 1000 W HF: 100 W

 

Audio Inputs

 

Input Sensitivity        

  • Mic: -32 dBu; Line: -2 dBu

Input Impedance       

  • Mic: 560 O unbalanced, 1 kO balanced; Line: 20 kO unbalanced, 40 kO balanced

 

Power Supply, Voltage (Fuses)

 

UK / Australia / Europe        

  • 220–240 V~, T 4.0 A H 250 V

Power consumption@ 1/8 max power        

  • 140 W

Rigging options         

  • 6 x M10 threaded internal rigging points

 

Construction / Dimensions / Weight

 

Construction  

  • Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket. Powder coated galvanised perforated steel mesh grille with foam backing

Dimensions (H x W x D)        

  • 620 x 394 x 330 mm (24.4 x 15.5 x 13″)

Net weight     

  • 5 kg (45.1 lbs)